- On sale!
Best in offer
Specials
surveillance
HIKVISION...surveillance
Home Guard...surveillance
VistaCam 1000...controllers
FIBARO Z-Wave...extras-addons
iTach IP2IR...surveillance
6MP Hikvision...surveillance
6MP Hikvision...New products
surveillance
Home Guard...FIBARO Dimmer Bypass 2
The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.
-
100% Secure Payments
-
Australian Wide Flat Rate Delivery
-
Fast Response
Quick Overview |
The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.
- Easy to use and install
- Supports low power lamps such as LEDs or energy saving compact fluorescent lamps
Product Details |
The Fibaro Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).
It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Manuals:
⇒ Fibaro Z-Wave In-Wall Dimmer 2 Manual
⇒ Fibaro Z-Wave Dimmer 2 Bypass Manual
Technical Specifications |
Application
|
Indoor use only
|
Operation temperature
|
0 ~ 35 °C
|
Power Consumption
|
less then 1.2W
|
Weight
|
35g
|
Power Supply
|
220 - 240 V ~ 50 Hz
|
Dimensions
|
(L x W x H) 31mm x 21.6mm x 13mm
|
Compliance
|
RoHS 2011/65/EU, LVD 2006/95/EU, EMC 2004/108
|